FAQ RSS

Check to make sure that the footplates are sitting flat on the hoverboard and that they depress the sensors in the footpads of the hoverboard when you’re sitting on it.  Also check to make sure that the hoverboard works by itself and that the battery is charged, etc.

Read more

It’s even easier to remove HoverKart than it is to install it.  Just release the buckles, remove the kart frame, and you’re good to go!

Read more

The Hoverkart is designed to fit all common sizes of Swegway boards such as the basic 6.5inch, 8inch, 8.5inch Extreme and 10inch wheeled boards.   Simply place HoverKart on your hoverboard so that the feet sit flat on the footpads of the board, then buckle the straps around the board.  It’s always a good idea to make sure the straps are tight and adjust if necessary before riding.

Read more

Most often children can use it as young at 3 as all our HoverKart have adjustable footrest. We also recommend a maximum weight of 100kg. Although it has been tested for safety requirements for higher weight up to 120kg!

Read more

HoverKart quickly and easily attaches to your hoverboard.  The two handles are connected directly to the two halves of the board, putting you in full control.  Pushing forward or back on the handle is just like leaning forward or back with your foot, which causes the wheel to rotate.  Each wheel is controlled independently, which gives HoverKart its awesome manoeuvrability.

Read more